(Summary description)What are the advantages of the factory building as a solidified floor? Now more and more industrial plants choose to make the solidified floor. What magic power can the solidified floor get the unanimous praise of the majority of users? Today, Xiaobian will take you to analyze the advantages of solidified floor?



1. Durable and durable

There is no need to say more about epoxy flooring. As long as you are engaged in the flooring industry, you must be very clear. It's the conscience of the industry to use it for a year without peeling. It's normal to use it for three or five months. The solidified floor can change the chemical composition of the concrete surface and improve the ability of the concrete to resist weathering and ultraviolet erosion, so as to greatly prolong the service life of the concrete. It is no problem to maintain it for ten or twenty years.

2. Safe and environment-friendly, non-toxic and harmless

Solidified floor is the reaction between inorganic materials and concrete, so as to improve the strength of concrete. It is non-toxic and harmless, and has no harm to human body and the environment. While epoxy floor coating will add a large number of volatile organic solvents in production. Once the gas volatilized by the solvent is inhaled, it will cause great harm to human body.



3. The strength and hardness increased significantly

Mohs hardness is a unified standard used by the industry to judge the ground hardness. The cured floor can increase the strength of ordinary C25 concrete floor to 8, while the hardness of epoxy floor is about 5. As a result, it is obvious that the solidified floor has unparalleled advantages in the factory workshop with the access of large mechanical vehicles.

Introduction to the construction process of plant solidified floor:

1. Clean the surface of the base course and remove floating ash, oil stain and other substances that are not conducive to bonding; If there are too many potholes in the base course, it needs to be leveled in advance; The amount of concrete sealing and curing agent shall be measured according to the construction area.

2. Pour the concrete sealing curing agent evenly on the ground and allow it to flow freely and penetrate. At the same time, gently scrape with a trowel to make the whole ground penetrate evenly; When the penetration reaction of the base surface becomes smooth and thick, wet the viscous surface with water mist to continue the penetration reaction of sinol sealing curing agent.

3. Observe the compactness and permeability of the base surface, and brush more than three layers of high permeability sealing curing agent on the ground. After the base surface penetration reaction is complete (it is better if the surface moisture is not completely dry), use a professional ground cleaning machine to clean the surface and remove excess materials.

4. 24 hours after completion, polish the floor surface with soft wool polishing pad, and polish the base surface with resin grinding plate for many times. The longer the use time, the better the gloss.



The above is about "what are the advantages of the factory building as a solidified floor?" SINOSURE focuses on solving all kinds of floor problems. Its products include concrete sealing and curing agent, water-based floor paint, cement curing agent, floor dye, etc. it provides one-stop curing floor service and customized floor solutions for customers.

• Categories:News
• Author:
• Origin:
• Time of issue:2022-03-28 16:47
• Views:0